Troy-Bilt

WASHER .510 X .995 X .060FITS MODELS: 0360, 12055, 12056, 12057, 12058, 12059, 12064, 12068, 12069, 12070

WASHER-FLAT 1/4" 

WASHER - KEY HANDLE BAR - FITS SOME PONY, JUNIOR AND ECONO HORSE TILLERS Replace Troy-Bilt Part#'s: 9955 GW-9955 736-04445

WASHER-LOCK .438 EXT TOOTH - FORWARD INTERLOCK SYSTEM FITS HORSE MODELS: 0360, 12055, 12056, 12057, 12058, 12059, 12064, 12068, 12069, 12070

WASHER-NYLON 1.06" X .51" X .09"

THRUST WASHER

PTO SHIFT ECCENTRIC - PART OF CLUTCH DOGS KIT 2130 (1902404 and 10353). Replaces part# 2461.

Complete kit to reshim the wheel shaft on any Horse model tiller. No substitutions. Contains: Part NumberTroy-Bilt Part NumberDescriptionQtyCP1166-11166-1Shim - Wheel Shaft ".062" thick2CP1166-21166-2Shim - Wheel Shaft ".030" thick2CP1166-31166-3Shim - Wheel Shaft ".015" thick2CP1166-41166-4Shim - Wheel Shaft ".010" thick6CP95019501Retaining Ring - Horse I & II tillers2CP95119511Retaining Ring - Horse III and Later tillers2CP96219609, 9621Wheel Shaft Seal - All Horse tillers2B12B12Wheel Shaft...

Wheel shaft shim set - Horse Tillers Serial #101 and Up, Pony, Junior and Econo Horse Tillers. No substitutions. Contains: Part Number Troy-Bilt Part Number Description QtyCP1166-2 1166-2 Shim - Wheel Shaft ".030" thick 2CP1166-3 1166-3 Shim - Wheel Shaft ".015" thick 2CP1166-4 1166-4 Shim - Wheel Shaft ".010" thick 6 ...

WHEEL SPEED LEVER WITH KNOB FOR HORSE OPC SERIAL NUMBER 120550100101 AND UP THIS IS OEM PART REPLACES PART NUMBERS: 2628, 2261, 2178

BUSHING - .5 X .316 X .375 (Qty 1) Check your parts manual for the number used on your machine. OTHER PARTS TO CONSIDER: CP2146 - Bushing .5 X .375 X .325CP1113-1 - Bushing .5 X .375 X .3 Replaces Troy-Bilt part numbers: 2447, GW-2447, GW-2160, 2160 USED ON THE FOLLOWING MODELS:  HORSE III (6, 7 & 8 HP) ROTOTILLER (S/N 640000-855638)--> FORWARD/NEUTRAL/REVERSE LEVERHORSE OPC (7, 8, & 11HP) ROTOTILLER (S/N 00855639-AND UP)-->WHEELS/TIRES/PTO DRIVE LEVER ASSEMBLY0360 HORSE-SILVER...

Internal Lockwasher - .312