MTD

GASKET - GEAR HOUSINGReplaces Troy-Bilt part#s: 921-0422950032GW-50032

GEAR - HIGH SPEED, WHEEL DRIVE, 46 TEETH, USED ON TILLER SERIAL # 33548 AND UPSPECS: 4 3/4" across - 1" IDThis is an original Troy-Bilt part. Replaces Troy-Bilt part numbers: 1232

GEAR - SPLINE - 10 TEETH FITS:  HORSE TILLERS - SERIAL NUMBER 33548 & UP PLEASE NOTE: HORSE TILLERS THAT ARE SERIAL NUMBER 33547 & BELOW WOULD HAVE USED PART 1055 WHICH HAS BEEN DISCONTINUED. IT WAS A SIX TEETH SPLINE GEAR.

GEAR - SPUR -20 TEETH

GEAR - SPUR - 56 TEETH - SEVERAL HORSE TILLER MODELS

GEARBOX ASM - TILLER NEW/OLD STOCK - DISCONTINUED PART (OEM) REPLACES PART NUMBERS: 986-04001, 1918453 FITS: · 21A-148H063 1.5HP (2002)-->Transmission Assembly

KNOB-HANDLE

KNOB-HANDLEREPLACES PART NUMBERS: 720-0279, 01002925, 01003131, 1766537, GW-1766537, 920-0279

HEX CAP SCREW, 1/4 - 20 x 1.5 Replaces Troy-Bilt part numbers:  1100811 710-0606

HEX NUT 1/4-20 REPLACES: 712-04082, 71204082, 753-05383, 75305383, 71204064, 753-05527,75305527

Hi-Lo Shifter eccentric - Horse tillers. IF YOU HAVE A HORSE I OR II - 1027 and 1027A eccentrics used 2 o-rings and a shifter fork inside the transmission. The 1027A is discontinued, with the only available alternative being the updated 611-04003, which uses a shoe pin which rides inside of the slider gear in the transmission (in place of the shifter fork). To update your tiller you will need: 1442 shoe pin, 611-04003 eccentric, 1441 spring, 1440 washer, and 9611 (CP9622) eccentric seal....

Hi-Pro Key 1/4" x 1" - Fits various Troy-Bilt Tiller Wheel Shafts - Be sure to check your application for the correct part number. Connects wheel shaft to clutch. Use with 1235A & 1025 wheel shaftsReplaces Troy-Bilt part numbers:9305GW-9305714-04059