Gaskets & Shims

Gasket Kit - All Troy-Bilt Horse Tillers - Includes 6 total gaskets:  (2) CP1124-2 Driveshaft Cap Gasket .010" Thick (1) CP1123 Transmission Cover Gasket(2) CP1129-1 Tine Shaft Cover Gasket .010" Thick(1) CP1129-2 Tine Shaft Cover Gasket .030" ThickReplaces Troy-Bilt Part number:1121A 

SHIM .031" - USE 2 FOR 1138-1 OR 736-04187 WHICH ARE .062"1.0" X .7656" X .031"

GASKET - TRANS COVER - PONY I, II, & SUPER

Driveshaft shim set - any Horse model tiller. No substitutions. Contains: Part Number   Troy-Bilt Part Number   Description  QtyCP1224-1      1224-1   Shim - Driveshaft ".010" thick   2CP1224-2      1224-2   Shim - Driveshaft ".030" thick   4CP1224-3      1224-3   Shim - Driveshaft ".005" thick   1 ...

Rear cap gasket - .010" thick. Used on front and rear drive shaft caps for all Troy-Bilt Horse tillers and some Pony, Junior and Econo-Horse tillers. Replaces Troy-Bilt part numbers:1124-2GW-1124-2GW-1124-2099RCG-1

Gasket Set - Pony Serial Numbers S164133 and Above Includes:  (1) 20693-2 Gasket Front Cover .010 (2) 1129-1 Gasket Tiller Cover (2) 1124-2 Gasket Bearing Cover (1) 20694 Gasket Tranmission Cover (1) 1129-2 Gasket Tiller Cover .030 Replaces Troy-Bilt Part#s: 10358 GW-10358

GASKET - GEAR HOUSINGReplaces Troy-Bilt part#s: 921-0422950032GW-50032

Main drive shaft shim - Troy-Bilt "Horse" tillers - 1 1/2 I.D. - 0.005" ThicknessReplaces Troy-Bilt part numbers:1224-3

Main drive shaft shim - Troy-Bilt "Horse" tillers - 1 1/2" I.D. - 0.010" ThicknessReplaces Troy-Bilt part numbers:1224-1

Main drive shaft shim - Troy-Bilt "Horse" tillers - 1 1/2" I.D. - 0.030" ThicknessReplaces Troy-Bilt part numbers:1224-2

Stem Pinion Shim - Troy-Bilt "Horse" tillers - .010"1.234" X 1.015" x .010"Replaces Troy-Bilt part numbers:1132-3GW-1132-3

Stem Pinion Shim - Troy-Bilt "Horse" tillers - .033"1.234" X 1.015" x .033"Replaces Troy-Bilt part numbers:1132-1GW-1132-1