Gears

36 -Tooth Gear - Wheel Shaft Drive - Use with 11601 Drive Shaft in PTO Model Tillers. Is the only replacement for 1221 in the older model tillers with the 1902 drive shaft and 1878 wheel shaft. The original 1221 has been discontinued. Replaces Troy-Bilt part numbers:  2656 GW-2656 GW-1221 1221

Bronze worm gear - 30 teeth -  1" ID, Troy-Bilt Horse tillers with straight tine shaft (911-04082). Parts to consider: 911-04082 - Straight tine shaftCP97074 - Roller BearingCP9623 - Straight tine shaft sealsCP1104 - Key Replaces Troy-Bilt part numbers: 1901976GW-1901976

OEM Bronze worm gear - 30 tooth, 1.25" diameter - fits Horse Model tillers with 1026A tapered tine shaft. Comes with two shims (94017 -1.75X1.260X.055) for correct gear tolerance.  Other Parts that go with the Bronze Gear: Replacement 2675 gear uses CP97067 Key (.25 X 1.0). (The original gear used CP1104 Key-Woodruff that is .25 X 1.12)Use CP9618 tine shaft seals for the CP1026A tine shaft.If you need tine shaft shims, they are: CP1447-1 (1.775 X 1.375 X .0050) and CP1447-2...

Dog Clutch - Wheel drive. Clutch drives either slow or fast wheel drive gears according to wheel speed sift lever gear selection.GW-1237

GEAR - HIGH SPEED, WHEEL DRIVE, 46 TEETH, USED ON TILLER SERIAL # 33548 AND UPSPECS: 4 3/4" across - 1" IDThis is an original Troy-Bilt part. Replaces Troy-Bilt part numbers: 1232

GEAR - SPLINE - 10 TEETH FITS:  HORSE TILLERS - SERIAL NUMBER 33548 & UP PLEASE NOTE: HORSE TILLERS THAT ARE SERIAL NUMBER 33547 & BELOW WOULD HAVE USED PART 1055 WHICH HAS BEEN DISCONTINUED. IT WAS A SIX TEETH SPLINE GEAR.

GEAR - SPLINED - 16 TEETH FITS:· HORSE I 7HP ROTO TILLER (S/N 1001-639999)-->WHEEL GEAR COMBINATIONS & WHEEL-TO-TINE RATIOS· HORSE I 7HP ROTO TILLER (S/N 1001-639999)-->TRANSMISSION ASSEMBLIES· HORSE I 8HP ROTO TILLER (S/N 1001-639999)-->WHEEL GEAR COMBINATIONS & WHEEL-TO-TINE RATIOS· HORSE I 8HP ROTO TILLER (S/N 1001-639999)-->TRANSMISSION ASSEMBLIES· HORSE II 6HP ROTO TILLER (S/N 1001-639999)-->WHEEL GEAR COMBINATIONS & WHEEL-TO-TINE RATIOS· HORSE II 6HP ROTO TILLER (S/N...

GEAR - SPUR -20 TEETH

TINE GEAR KIT, "HORSE", INC. BEARINGS, SPACERS, KEY AND GEAR - A diagram of the kit can be found under Troy Bilt Helpful Information on the main page of our website. It is number 4 on the PDF list and is free to download.  Tine gear kit for all "Horse" model Troy-Bilt tillers equipped with the tapered tine shaft (CP1026A, OEM # 1026). Kit Includes: (1) CP2675 Bronze Gear (2) CP1715 Tine Shaft Bearings(2) 94017 Spaces for proper adjustment(1) CP97067 Key-Woodruff .25 x 1.0 The kit...

GEAR - TINE SHAFT DRIVEFITS SOME PONY, JUNIOR AND ECONO TILLERS

GEAR- CLUTCH

GEAR - PINION