Troy-Bilt

NUT-WING/LK 5/16-18ZP FITS: PONY III (20595, 20596, 20597), PONY IV (5011, 5111), JUNIOR II (50173, 50204) ALSO FOR TROY BILT HILLER FURROWER: 2579, 1317 , 1356, 20868, 2638

O-Ring - Hi/Lo Shifter (2 Required) - .625 X .438 - "Horse" I & II tillers - Serial number 493013 and below. All later tillers use our CP9622 Hi/Lo shaft seal. Replaces Troy-Bilt part numbers:9603GW-9603

PIN#COTTERLESS HITFITS WITH ROW MAKER 12589, ROW MARKER ATTACHEMENT 1832, AND BUMPER ATTACHMENT 1875 ON SOME PONY AND ECONO HORSE TILLERS

"O-Ring" - Pinion Bearing Plug, Oil Seal - 1" ID - All Troy-Bilt "Horse" tillersSeals pinion to main transmission housing. Two-Required for transmission rebuild. Replaces Troy-Bilt part numbers: 10629604GW-9604

PIVOT PIN - OPC LEVER  Fits Horse OPC Serial #'s 120560100101 and up.

PLATE - HANDLE BAR ADJUST Used on various Pony, Junior and Econo Horse Models. Check your model & serial numbers. REPLACES PART NUMBERS: 20753, 1900475010

Plate - Tine Engage w/DecalFits Horse OPC Serial #'s 120870100101 and Up.

Push Plug (Red) used on the transmission casing on various Horse Tillers.

PLUG-BOREFITS MODELS: Junior III - 5211, 5311 and Junior IV OPC - 5611, 5711

POWER UNIT TRANSMISSION COVER - RED - TROY BILT HORSE TILLERS THIS PART IS NEW BUT OLD STOCK REPLACES PART NUMBERS: GW-2523, 1900869004, 1900869010, 1900869001, GW-1900869010, 719-04015, GW-1900869001, GW-1900869004OTHER NEUTRAL PLUNGER PARTS: 1496 Neutral Plunger Spring (.78 X 2.125") 1035 Neutral Plunger9504 Neutral Plunger ClipCP9831 Locknut 3/8”-161902004 Neutral Plunger Bolt 3/8”-16X1.5 Low ProfileCP9751 Hex Head Screw 5/16”-18CP9801 Hex Nut 5/16”-18 ...

PTO Transmission Dipstick - Horse Tillers with PTO (OEM Part) Fits Horse III and higher (Serial Number 640000 and Up) Replaces Troy-Bilt part numbers:  2136 GW-2136 1909157

PTO LEVER - ECCENTRIC SHAFT (786-04002)REPLACES PART NUMBERS: 786-04002, 2122, 1900878001