Troy-Bilt

PULLEYFITS MODELS: 14011, 14012, 34500, 34501

PULLEY

RETAINER - SPRING

Retaining Ring - .707" IDReplaces Troy-Bilt part numbers: 9500GW-9500916-01011113527

Retaining Ring - drive shaft, input pinion shaft and gear assemblies Replaces Troy-Bilt Part#s: 9517, GW-9517, 716-04102Fits: Horse III and higher, some Pony, Junior, Tuffy and Econo-Horse Tillers

Retaining Ring - Pinion

RET. RING - 1.00" - Horse I and II tillers with serial numbers between 31456 and 600008. Use with wheel shafts 1025 and 1235A.Replaces Troy-Bilt part numbers:9501GW-95011110

Return Spring - Forward Interlock Lever OPC Horse Replaces Part #'s: 9387, GW-9387, 732-04864, 732-04864A Fits models: 0360, 12055,12056, 12057,12058, 12059, 12064, 12068, 12069,12070, 12071, 12074, 12075, 12080, 12081, 12082, 12083, 12087, 12087C, 12088,12088C, 12089, 12089C, 12090, 12090C, 12153, 12204

Ring-Retaining - PTO Shifter Eccentric - Horse III and Later tillersREPLACES PART NUMBERS: GW-T11704, GW-97013, GW-9516, 9516

CLIP-ROD LH "B"

Roller Assembly, Horse Tillers Part 2084 for Horse I & II Tillers is no longer available. This part is the only replacement available. Other parts to consider: CP1051A: Roller Repair KitCP1131-1: Bushings .5 x .375 x .3 - Yoke Link (Need 4)CP2146: Bushings .5 x .75 x .325- Yoke to Engine Mount (Need 2)1133-1A: Adjustment Block for Horse I1920: Adjustment Block for Horse II and laterCP1122: Horse I Forward/Reverse SpringCP1492: Horse II Forward/Reverse Spring2163: Horse III...

ROLLER REPAIR KIT - FWD/REV LEVER - HORSE Other Parts to Consider: CP1131-1: Bushings .5 x .375 x .3 - Yoke Link (Need 4)CP2146: Bushings .5 x .75 x .325- Yoke to Engine Mount (Need 2)1133-1A: Adjustment Block for Horse I1920: Adjustment Block for Horse II and laterCP1122: Horse I Forward/Reverse SpringCP1492: Horse II Forward/Reverse Spring2163: Horse III and later Forward/Reverse SpringCP9323: Steel Slotted Spring Pin (Horse I & II Roller Assembly) ...